background image

2

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri.

Benytt samme batteritype eller en tilsvarende type

anbefalt av apparatfabrikanten.

Brukte batterier kasseres i henhold til fabrikantens

instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en likvärdig typ som
 rekommenderas av apparattillverkaren.
Kassera använt batteri enligt gällande föreskrifter.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin.
Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

ADVARSEL!

Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering.

Udskiftning må kun ske med batteri

af samme fabrikat og type.

Levér det brugte batteri tilbage til leverandøren.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

SAFETY-RELATED  COMPONENT  WARNING!!

COMPONENTS  IDENTIFIED  BY  MARK  

0

  OR  DOTTED  LINE

WITH  MARK  

0

  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN

THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.

TABLE  OF  CONTENTS

1.

GENERAL

...................................................................

3

2.

GENERAL  DESCRIPTIONS

2-1. Multi-band .......................................................................

4

2-2. Real Time Clock (RTC) ..................................................

4

2-3. Vibra Functionality .........................................................

4

2-4. Battery Safety ..................................................................

4

2-5. Battery Capacity ..............................................................

4

2-6. Accessory Interface .........................................................

5

2-7. RF Antenna Connector/Antenna Switch ........................

5

2-8. Languages ........................................................................

5

3.

ACCESSORIES

3-1. Travel Charger .................................................................

6

3-2. Desk Top Charger (not for sale by itself) .......................

6

3-3. Extended Battery (TBD) .................................................

6

3-4. Standard Battery ..............................................................

6

4.

JIGS  AND  TOOLS

.................................................

7

5.

DISASSEMBLY

.........................................................

7

6.

INTERFACE  TO GSM-TESTER

.........................

9

7.

PROGRAMMING  INSTRUCTIONS

7-1. Requirement .................................................................... 10
7-2. Hardware Set-up ............................................................. 10
7-3. Software Set-up ............................................................... 10

8.

SAVE  PERSONAL  DATA  IN  MOBILE

......... 11

9.

EXPLODED  VIEW

................................................... 12

Summary of Contents for CMD-Z28













Reviews: