Basics
15
EN
Basics
If interference occurs on the handset
When you press
(LINE 1)
or
(LINE 2)
, the handset automatically
searches for the channel with the best reception. However, if you
notice interference during a conversation, move closer to the base unit.
If interference persists, press
(CHANNEL)
to switch to another channel
to improve the sound quality of your telephone conversation.
Note
If you hear five short beeps when you press
(CHANNEL)
, move closer to the
base unit.
If the handset battery becomes weak during a call
The handset will beep every three seconds. Finish your call and charge
the battery pack.
Even during a call, you can check the battery condition by pressing
(BATT CHECK)
.
Redialing
1
Press
(LINE 1)
or
(LINE 2)
to select the line, and wait until
the corresponding line lamp lights up.
2
Press
(REDIAL/PAUSE)
to redial the number last dialed.
Notes
• The number last dialed cannot be stored separately for each line. It is the very
last one you have dialed using either line.
• If the number exceeds 32 digits, the beeps will alert you that the number can’t
be dialed.
To erase the last phone number dialed
Press
(REDIAL/PAUSE)
twice.
The number will be erased from the memory, and you’ll hear a long
confirmation beep.
