![background image](http://html.mh-extra.com/html/sony/chc-cl1-compact-hi-fi-component-system/chc-cl1-compact-hi-fi-component-system_operating-instructions-manual_420245024.webp)
24
Hooking up the optional components
(continued)
To
Do this
Precautions
On operating voltage
Before operating the system, check that the
operating voltage of your system is identical
with the voltage of your local power supply.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet if it is not to
be used for an extended period of time.
To disconnect the power cord, pull it out by the
plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
system, unplug the system and have it checked by
qualified personnel before operating it any further.
• AC power cord must be changed only at the
qualified service shop.
• When you connect the power cord to a wall outlet,
even if the power is off, the system begins charging
for remote and timer functions. Therefore the
surface of this unit become warm, this is normal.
On placement
• Make sure the system fan is on during use.
Place the system in a location with adequate air
circulation, and do not place anything on top of the
system.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is:
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight.
Make an analog
recording from an
analog component
Connect the audio cords.
Listen to the
connected optional
component
Press MD to switch the function
to MD or VIDEO.
Additional Information
Make a digital
recording to a
digital component
Connect a digital cable.