Installation Instructions CH-SMAC400
2
3.
Attach CH-SMAC400 to Interface Bracket by placing the mounting buttons of interface bracket into the teardrop slots of
CH-SMAC400. Make sure the mounting buttons are placed securely in teardrop slots. See Figure 4.
Figure 4
4.
Place locking strap over top mounting buttons and secure using two ¼-20 button head cap screws and two ¼-20 square nuts.
Use ¼-20 tamper-proof security screws and 5/32” security hex key (provided) for added security. See Figure 5 and Figure 6.
Figure 5
Figure 6
5.
Set desired amount of friction for rotating the screen by tightening or loosening the four nuts on the back of the
CH-SMAC400. See Figure 7.
Figure 7
6.
With the aid of another person, lift flat panel display and CH-SMAC400 up to mount, aligning buttons of rotation accessory
with slots in the mount.
7.
Raise safety latch on mount to secure display, making sure latch is completely engaged.
8.
If you wish to rotate screen the other way, take screen and rotation accessory from mount, rotate the back plate of the
CH-SMAC400 by 90 degrees.
9.
Install screen on mount.
10. Use holes on outside bends to tie wires for cable management.
11. On some mounts, you may have to increase friction on tilting and/or roll mechanisms since the CH-SMAC400 adds depth to
overall installation.
LOCKING
STRAP
