Sony CFD-E90L, Service Manual

Page: 6 / 63

5
CFD-E90L
8
GB
Playing a tape
Connect the supplied mains lead.
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press
n
.
The player turns on (direct power-on)
and starts playing.
With the side you want
to play facing you
Display
2 1
Basic Operations
9
GB
Use these buttons for additional operations
To Press
adjust the volume *, —
(VOL +, — on the remote)
stop playback xZ
fast-forward or rewind the tape m or M
pause playback X
Press the button again to
resume play after pause.
eject the cassette xZ
turn on/off the player OPERATE (or POWER)
* and
n
have a tactile dot.
xZ
X
m , M
OPERATE
(or POWER)
, –
10 GB
Recording on a tape
Connect the supplied mains lead.
1
Press
xZ
to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the programme source you
want to record.
To record from the CD player, insert
a CD and press
x
on the CD section.
To record from the radio, tune in the
station you want.
3
With the side you want to
record on facing you
Display
1
Basic Operations
11 GB
3
Press
z
to start recording
(
n
is depressed automatically).
Use these buttons for additional operations
Tips
¥ Adjusting the volume or the
audio emphasis
will not
affect the
recording level.
¥ If the MW/LW
programme
makes a
whistling sound
after you’ve
pressed
z
in
step 3, press
MODE to select
select the position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press FUNCTION on the
remote repeatedly until
TAPE appears.
3 Press
z
.
xZ
X
MODE
n
To Press
stop recording
xZ
pause recording X
Press the button again to resume
recording.
turn on/off the player OPERATE (or POWER)
OPERATE
(or POWER)