– 6 –
1
Press CD (direct power-on).
3
Close the CD compartment.
4
Press
u
(
N
on the remote, CFD-S32/S32L only).
The player plays all the tracks once.
Track number Playing time
To
adjust the volume
stop playback
pause playback
go to the next track
go back to the previous track
remove the CD
turn on/off the player
c
Playing a CD
Press
, – (VOL +, – on the remote,
CFD-S32/S32L only)
x
u
(
X
on the remote, CFD-S32/S32L only)
Press the button again to resume play after
pause.
>
.
Z
PUSH OPEN/CLOSE
OPERATE (or POWER)
1
Press RADIO BAND•AUTO PRESET
until the band you
want appears in the display (direct power-on).
Each time you press the button, the indication changes as
follows:
CFD-S22/S32: “FM1”
t
“FM2”
t
“AM”
CFD-S22L/S32L/922L:
“FM1”
t
“FM2”
t
“MW”
t
“LW”.
2
Hold down or – (TUNE + or – on the remote,
CFD-S32/S32L only) until the frequency digits begin to
change in the display.
The player automatically scans the radio frequencies and
stops when it finds a clear station.
If you can't tune in a station, press the button repeatedly
to change the frequency step by step.
To
adjust the volume
turn on/off the radio
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for AM or
MW/LW.
FM
AM/MW/LW
Tips
• The "FM1" and "FM2" bands have the same functions. You can store the
stations you want separately in "FM1" and "FM2".
• If the FM broadcast is noisy, press PLAY MODE•MONO/ST until
"Mono" appears in the display and the radio will play in monaural.
Listening to the radio
Press
, – (VOL +, – on the remote,
CFD-S32/S32L only)
OPERATE (or POWER)
Display
Display
2
Press
Z
PUSH OPEN/CLOSE down to open the CD
compartment and place a CD in the CD compartment.
With the labeled side up
c
Display
