Setting Up
24
EN
Choosing the power sources
(continued)
Changing the AM tuning interval (only for the
models equipped with the AM TUNING INTERVAL
selector at the bottom)
If you need to change the AM tuning interval (preset
to 9 kHz at the factory), do the following:
1
Disconnect the power cord and remove all the
batteries.
2
Press the POWER switch for about 3 seconds.
3
Set the AM TUNING INTERVAL selector (at the
bottom).
After changing the tuning interval, you need to reset
preset radio stations.
3
Inserting batteries into the remote
Insert two R6 (size AA) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the
player, replace all the batteries with new ones.
4
Using the player on batteries
Insert eight R14 (size C) batteries (not supplied) into
the battery compartment.
To use the player on batteries, disconnect the AC
power cord from the player.
Note
When you operate the
player with the
batteries, you cannot
turn on the player
using the remote.
Tip
Replace the batteries
when the OPR/BATT
indicator dims or when
the player stops
operating. Replace all
the batteries with new
ones. Before you
replace the batteries, be
sure to take out the CD
from the player.
Summary of Contents for CFD-370
Page 33: ...Additional Information 33EN ...
