manualshive.com logo in svg

Sony CECH-ZVS1A, Instruction Manual

Share
Download
Sony CECH-ZVS1A Instruction Manual Download Page 11

11

 

GB

Connecting the PlayStation

®

3 system

Connecting the AC power cord

Connect the DIGITAL OUT (OPTICAL) connector of your PS3™ system to the DIGITAL input 

connector of the surround sound system using an optical digital cable.

Do not plug the AC power cord for the surround sound system into an electrical outlet until you have 

made all other connections.

1 

Connect the AC power cord to the AC adaptor.

AC adaptor

AC power cord

2 

Plug the connector of the AC adaptor into the DC IN 18V connector on the rear of the 

surround sound system.

3 

Plug the AC power cord into the AC power outlet.

Caution

•  After connecting the AC power cord, wait about 20 seconds before pressing the power button to turn on the system.

•   Connect the system to an easily accessible electrical outlet. Should you notice an abnormality in the system, 

disconnect the plug from the electrical outlet immediately.

DIGITAL

Rear

DIGITAL OUT (OPTICAL)  

connector 

Optical digital cable

PS3™ system

Ge
tting S

tar

ted

Summary of Contents for CECH-ZVS1A





















Reviews:

No comments

Brands by name

Popular brands

Load more brands