18
CDX-V5800
2-109-483-11 (1)
01GB02CD-E.fm
masterpage:Left
Selecting the desired item
Press the select button and the
desired button simultaneously.
Select button
+
(3)
: A.SCRL
*
2
Select button
+
(4)
: M.DSPL
Select button
+
(4)
: DEMO
*
1
Select button
+
(6)
: BEEP
*
3
Select button
+
(MODE)
: PAL/NTSC
*
1
Select button
+
(DSPL)
: DIM
After the mode setting is complete, the display
returns to normal play mode.
To cancel the item, press the select button and the
desired button simultaneously again.
*1
When the unit is turned off.
*2
When CD is played.
*3
The beep sound is output only when the built-in
amplifier is used.
Setting the equalizer (EQ3)
You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press
(SOURCE)
to select a desired
source.
2
Press
(EQ3)
repeatedly to select the
desired equalizer curve.
Each time you press
(EQ3)
, the item
changes.
To cancel the equalizing effect, select “OFF.”
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
Press
(SOURCE)
to select a desired
source.
2
Press
(EQ3)
repeatedly to select the
desired equalizer curve.
3
Adjusting the equalizer curve.
1
Press the select button repeatedly
to select the desired tone range.
Each time you press the select button, the
tone range changes.
LOW
t
MID
t
HI (
t
BAL
t
FAD
t
LPF
t
SUB
t
AUX
)
2
Rotate the volume control dial to
adjust to the desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
3
Repeat step
1
and
2
to adjust the
equalizer curve.
To restore the factory-set equalizer curve,
press the select button for 2 seconds.
Note
When EQ3 is set to “OFF,” you cannot adjust the
equalizer curve settings.
