11
CDX-M7850
2-586-657-21 (1)
H:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm
masterpage:Right
H:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm
masterpage:Right
Other functions
Changing the sound settings
Adjusting the sound
characteristics
You can adjust the equalizer, DSO, bass, treble,
balance, fader and subwoofer volume.
1
Select a source, then press
(SOUND)
repeatedly to select the desired item.
The item changes as follows:
EQ7
t
DSO
t
BAS
(bass)
t
TRE
(treble)
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUB
(subwoofer volume)*
*
“
∞
” is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Rotate the VOL control dial repeatedly
to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2: press
<
or
,
instead of the VOL control
dial.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press
(MENU)
.
2
Rotate the SEEK control dial until
“Sound” appears, then press
(ENTER)
.
3
Rotate the SEEK control dial until
“EQ7 Tune” appears, then press
(ENTER)
.
4
Rotate the SEEK control dial to select
the desired equalizer type, then press
(ENTER)
.
5
Rotate the SEEK control dial to adjust
the desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
6
Press
(ENTER)
to move to the next
frequency.
The frequency changes as follows:
62Hz
t
157Hz
t
396Hz
t
1.0kHz
t
2.5kHz
t
6.3kHz
t
16kHz
Repeat steps 5 and 6 to adjust the equalizer
curve.
The confirmation dialog appears after
adjusting “16kHz” and pressing
(ENTER)
.
7
Rotate the SEEK control dial to select
“YES,” then press
(ENTER)
.
The setting is complete and the display
returns to normal play/reception mode.
To restore the factory-set equalizer curve, press
and hold
(ENTER)
in step 5 or 6, then rotate the
SEEK control dial to select “YES.”
With the card remote commander
In steps 2, 3 and 5: press
M
or
m
instead of the SEEK
control dial; in steps 4 and 7: press
<
or
,
instead
of the SEEK control dial; in step 6: press
<
or
,
instead of
(ENTER)
.
Adjusting menu items — MENU
1
Press
(MENU)
.
2
Rotate the SEEK control dial until the
desired menu item appears, then
press
(ENTER)
.
The items changes as follows:
Setup
y
Display
y
Receive Mode
y
Sound
y
Edit
y
List
3
Rotate the SEEK control dial until
desired setting item appears, then
press
(ENTER)
.
The digital indication moves to the right
(setting selection) side.
4
Rotate the SEEK control dial to select
the setting, then press
(ENTER)
.
The setting is complete.
5
Press
(MENU)
.
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In steps 2 and 3: press
M
or
m
instead of the SEEK
control dial; in step 4, press
<
or
,
instead of the
SEEK control dial.
continue to next page
t
