7
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 22.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold
(SELECT/ENTER)
.
The setup display appears.
2
Press
(SELECT/ENTER)
repeatedly until
“CLOCK-ADJ” appears.
3
Press
(SEEK)
+.
The hour indication flashes.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press
(SEEK)
–/+.
5
Press
(SELECT/ENTER)
.
The setup is complete and the clock starts.
To display the clock, press
(DSPL)
. Press
(DSPL)
again to return to the previous display.
