11
Tuning automatically
1
Select the band, then press
(SEEK)
+/–
control up or down to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold
(SEEK)
+/– control to quickly
locate the approximate frequency, then press
(SEEK)
+/– control up or down repeatedly to fine adjust to the
desired frequency (manual tuning).
Receiving a station through a list
— LIST
You can list up the frequency.
1
Select the band, then press
(LIST)
.
The frequency appears.
2
Rotate the volume control dial until the
desired station appears.
3
Press
(ENTER)
to receive the station.
The display returns to normal reception
mode.
With the card remote commander
In step 2: press
M
or
m
instead of the volume control
dial.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press
(SOUND)
.
2
Rotate the volume control dial until the
desired menu item appears, then
press
(ENTER)
.
3
Rotate the volume control dial to
select the setting, then press
(ENTER)
.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In steps 2 to 3: press
M
or
m
instead of the volume
control dial.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
*
When AUX source is activated.
EQ3 parametric
To select an equalizer type: “Xplod,” “Vocal,”
“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”
or “off” (
z
).
DSO
To select the DSO mode: “1,” “2,” “3” or “off”
(
z
). The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: “R10” – “0” (
z
) – “L10”
Fader
To adjust the balance between the front and rear
speakers: “F10” – “0” (
z
) – “R10”
Subwoofer
To adjust the subwoofer volume: “+10” – “0”
(
z
) – “–10”
(“–
∞
” is displayed at the lowest setting.)
LPF
(Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
z
), “125Hz” or “78Hz.”
AUX Level
*
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 13).
Adjustable level: “+18 dB” – “0 dB” (
z
) –
“–8 dB”
