19
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“MODE IPOD” appears and you will be able
to operate the iPod directly.
To change the display item
Press
(DSPL)
.
The display items change as follows:
Track name
t
Artist name
t
Album name
t
MODE IPOD
t
Clock
To exit the passenger control
Press and hold
(MODE)
.
Then “MODE AUDIO” will appear and the play
mode will change to “RESUMING.”
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
DSO
(Dynamic Soundstage Organizer)
Creates a more ambient sound field.
To select the DSO mode: “1,” “2,” “3” or “OFF.”
The larger the number, the more enhanced the
effect.
LOW
*
1
, MID
*
1
, HI
*
1
(page 20)
BAL
(Balance)
Adjusts the sound balance between the left and
right speakers.
FAD
(Fader)
Adjusts the relative level between the front and
rear speakers.
SUB
*
2
(Subwoofer volume)
Adjusts the subwoofer volume.
AUX
*
3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
*1
When EQ3 is activated.
*2
“ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3
When AUX source is activated (page 21).
