7
L
SEEK –/+ buttons
CD/USB
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio
:
To tune in stations automatically (press); find
a station manually (press and hold).
M
MODE button
To select the radio band (FM/MW/SW);
select the play mode of ATRAC Audio
Device.
N
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
O
To start the BTM function (press and hold).
P
RESET button
(located behind the front
panel)
Q
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
R
Number buttons
CD/USB
:
(1)
/
(2)
:
ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
(3)
:
REP
(4)
:
SHUF
(5)
:
DM+
To activate the DM+ function, set
“DM+-ON.” To cancel, set “DM+-
OFF.”
(6)
:
PAUSE
To pause playback. To cancel, press
again.
Radio
:
To receive stored stations (press); store
stations (press and hold).
S
DSPL (display)/SCRL (scroll) button
To change display items (press); scroll the
display item (press and hold).
T
AUX input jack
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
wa
<
(
.
)/
,
(
>
) buttons
To control CD/radio/USB, the same as
(SEEK)
–/+ on the unit.
Setup, sound setting, etc., can be operated by
<
,
.
ws
DSPL (display) button
To change display items.
wd
VOL (volume) +/– button
To adjust volume.
wf
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wg
SEL (select) button
The same as the select button on the unit.
During the Quick-BrowZer mode,
(SEL)
(select) is inactive.
wh
M
(+)/
m
(–) buttons
To control CD/USB, the same as
(1)
/
(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M
m
.
wj
SCRL (scroll) button
To scroll the display item.
wk
Number buttons
To receive stored stations (press); store
stations (press and hold).
Notes
•
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
•
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless
(SOURCE)
on the unit is
pressed, or a disc is inserted to activate the unit first.
About USB cap
When not using the USB terminal (
G
), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.