13
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“MODE IPOD” appears and you will be able
to operate the iPod directly.
To change the display to clock
Press
(DSPL)
.
To exit the passenger control
Press and hold
(MODE)
.
Then “MODE AUDIO” will appear and the play
mode will change to “RESUMING.”
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW
*
1
t
MID
*
1
t
HI
*
1
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUB
(subwoofer volume)*
2
t
AUX
*
3
*1
When EQ3 is activated (page 13).
*2
When the audio output is set to “SUB-OUT”
(page 14).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3
When AUX source is activated (page 14).
2
Rotate the control dial to adjust the
selected item.
3
Press
(BACK).
The setting is complete and the display
returns to normal play/reception mode.
Customizing the equalizer curve
— EQ3
“CUSTOM” of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press
(EQ3)
repeatedly to select “CUSTOM.”
2
Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
4
Press
(BACK).
The setting is complete and the display
returns to normal play/reception mode.
Tip
Other equalizer types are also adjustable.
Summary of Contents for CDX-GT45IP
Page 23: ......
