5
CDX-GT41UW/GT410U/GT460U/GT460US
SECTION 1
GENERAL
This section is extracted
from instruction manual.
• LOCATION OF CONTROLS
• CDX-GT41UW/GT410U
• CDX-GT460U/GT460US
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
EQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C
Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
1
/USB/AUX/SAT*
2
).
E
Disc slot
Insert the disc (label side up), playback
starts.
F
Display window
G
USB terminal 9
To connect to the USB device.
H
Z
(eject) button
To eject the disc.
I
BTM/CAT
*
2
button 8
To start the BTM function (press and hold).
J
(front panel release) button 5
AUX
OFF
BTM
DSPL
MODE
SCRL
PUSH SELECT
SEEK
SEEK
PAUSE
DIM
REP
SHUF
EQ3
SOURCE
1
2
3
4
5
6
CAT
GP/ALBM
1 2
qj
qh
4
5
8
6
3
CDX-GT410U
CDX-GT41UW
qa
qd
q;
9
qs
qfqg
7
qk
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
ws
qd
1
qj
ql
qf
wa
w;
wf
wd
7
K
SEEK –/+ buttons
CD/MD*
1
/USB*
3
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L
Receptor for the card remote
commander
M
MODE button 8, 10, 12
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
2
; select the unit*
4
;
select the play mode*
5
.
N
DSPL (display)/DIM (dimmer) button
8, 9
To change display items (press); change the
display brightness (press and hold).
O
RESET button
(located behind the front
panel)
4
P
Number buttons
CD/MD*
1
/USB*
3
:
(1)
/
(2)
:
GP
*
6
/ALBM
*
7
–/+
To skip albums (press); skip albums
continuously (press and hold)*
8
.
(3)
:
REP 8, 10
(4)
:
SHUF 8, 10
(6)
:
PAUSE
*
9
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q
SCRL (scroll) button 8, 9
To scroll the display item.
R
AUX input jack 11
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql
<
(
.
)/
,
(
>
) buttons
To control CD/radio/MD/USB, the same as
(SEEK)
–/+ on the unit.
w;
VOL (volume) +/– button
To adjust volume.
wa
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws
SEL (select) button
The same as the select button on the unit.
wd
M
(+)/
m
(–) buttons
To control CD, the same as
(1)
/
(2)
(GP/
ALBM –/+) on the unit.
wf
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When the SAT tuner is connected.
*3
When a USB device is connected.
*4
When a CD/MD changer is connected.
*5
When an ATRAC Audio Device is connected.
*6
When an ATRAC CD is played.
*7
When an MP3/WMA/AAC is played.
*8
If the changer/USB device is connected, the
operation is different, see page 12.
*9
When playing back on this unit.
Notes
•
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
•
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless
(SOURCE)
on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15.
About USB cap
When not using the USB terminal (
G
), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
EQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C
Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D
SOURCE button
To power on; change the source (Radio/CD/
MD*
1
/USB/AUX).
E
Disc slot
Insert the disc (label side up), playback
starts.
F
Display window
G
USB terminal
To connect to the USB device.
9
H
Z
(eject) button
To eject the disc.
I
BTM button 8
To start the BTM function (press and hold).
J
(front panel release) button 5
AUX
OFF
BTM
DSPL
MODE
SCRL
PUSH SELECT
SEEK
SEEK
PAUSE
DIM
REP
SHUF
EQ3
SOURCE
1
2
3
4
5
6
CAT
GP/ALBM
1 2
4
5
8
6
3
CDX-GT460US
CDX-GT460U
qa
qd
q;
9
qs
qfqg
7
qh
qk
qj
ql
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
4
wd
qd
1
qk
w;
qf
ws
wa
wg
wf
7
K
SEEK –/+ buttons
CD/MD*
1
/USB*
2
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L
Receptor for the card remote
commander
M
MODE button 8, 12
To select the radio band (FM/AM); select the
unit*
3
; select the play mode*
4
.
N
DSPL (display)/DIM (dimmer) button
8
To change display items (press); change the
display brightness (press and hold).
O
RESET button
(located behind the front
panel)
4
P
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
Q
Number buttons
CD/MD*
1
/USB*
2
:
(1)
/
(2)
: GP
*
5
/ALBM
*
6
–/+
To skip albums (press); skip albums
continuously (press and hold)*
7
.
(3)
:
REP 8
(4)
:
SHUF 8
(6)
:
PAUSE
*
8
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
R
SCRL (scroll) button 8
To scroll the display item.
S
AUX input jack 12
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
w;
<
(
.
)/
,
(
>
) buttons
To control CD/radio/MD/USB, the same as
(SEEK)
–/+ on the unit.
wa
VOL (volume) +/– button
To adjust volume.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd
SEL (select) button
The same as the select button on the unit.
wf
M
(+)/
m
(–) buttons
To control CD, the same as
(1)
/
(2)
(GP/
ALBM –/+) on the unit.
wg
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
When an MD changer is connected.
*2
When a USB device is connected.
*3
When a CD/MD changer is connected.
*4
When an ATRAC Audio Device is connected.
*5
When an ATRAC CD is played.
*6
When an MP3/WMA/AAC is played.
*7
If the changer/USB device is connected, the
operation is different, see page 12.
*8
When playing back on this unit.
Notes
•
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
•
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless
(SOURCE)
on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 15.
About USB cap
When not using the USB terminal (
G
), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
