16
Error displays/Messages
Card remote commander operation is not
possible.
*
1
Make sure the insulation film has been removed
(page 4).
CD playback
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not playback.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use (page 12).
MP3/WMA files cannot be played back.
*
1
The disc is incompatible with the MP3/WMA format
and version (page 12).
MP3/WMA files take longer to play back than
others.
*
1
The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
The display items do not scroll.
• For discs with very many characters, those may not
scroll.
• “A.SCRL” is set to “OFF.”
t
Set “A.SCRL-ON” (page 10).
t
Press and hold
(DSPL)
(SCRL).*
1
The sound skips.
• Installation is not correct.
t
Install the unit at an angle of less than 45° in a
sturdy part of the car.
• Defective or dirty disc.
The operation buttons do not function.
*
2
The disc will not eject.
Press the RESET button (page 4).*
2
Press
Z
(eject) (page 7).*
3
Radio reception
The stations cannot be received.
The sound is hampered by noises.
• Connect a power antenna (aerial) control lead (blue)
or accessory power supply lead (red) to the power
supply lead of a car’s antenna (aerial) booster (only
when your car has built-in FM/AM antenna (aerial)
in the rear/side glass).
• Check the connection of the car antenna (aerial).
• The auto antenna (aerial) will not go up.
t
Check the connection of the power antenna
(aerial) control lead.
• Check the frequency.
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t
Tuning stops too frequently:
Set “LOCAL-ON” (page 10).
t
Tuning does not stop at a station:
Set “MONO-ON” (page 10).
• The broadcast signal is too weak.
t
Perform manual tuning.
During FM reception, the “ST” indication
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t
Set “MONO-ON” (page 10).
An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
t
Set “MONO-OFF” (page 10).
*1
CDX-GT330/GT33W/GT230 only
*2
CDX-GT330/GT33W only
*3
CDX-GT230/GT130 only
ERROR
*
1
• The disc is dirty or inserted upside down.
*
2
t
Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t
Insert another disc.
FAILURE
(Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t
See the installation/connections manual of this
model to check the connection.
FAILURE
(Illuminates for about 1 second.) (CDX-
GT330/GT33W only)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t
Be sure to receive the channel that you want to
store, then try it again.
LOAD
(CDX-GT330/GT33W only)
The CD changer is loading the disc.
t
Wait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO DISC
(CDX-GT330/GT33W only)
The disc is not inserted in the CD changer.
t
Insert discs in the CD changer.
NO MAG
(CDX-GT330/GT33W only)
The disc magazine is not inserted in the CD changer.
t
Insert the disc magazine in the CD changer.
NO MUSIC
The disc does not contain a music file.
t
Insert a music CD in this unit or MP3 playable CD
changer.
NO NAME
A disc/album/artist/track name is not written in the
track.
