CDX-GT31MP/GT260MP/GT267ME/GT310MP/GT313MP
6
Note for Replacement of the Main Mount or IC501
When the main mount or IC501 has been replaced, the appropriate destination code must be set for each destination in the Test mode.
Setting the Destination Code:
1. With SOURCE OFF (Clock display), press the button [4], button [5] and button [6] for 2 seconds to enter the Test mode.
2. With the version of the microprocessor displayed, press the [SEEK+] button, the [SEEK–] button and the [PUSH SELECT] button to
call up the destination code display.
3. Check the “F XXXXXX” and the table on the LCD display. Enter the six-digit destination code to set up the destination.
Display in
fl
ash mode.
8 digits
F
X
OP5
X
OP4
X
OP3
X
OP2
X
OP1
X
OP0
Destination Code
Model name
Dset name
OP5
OP4
OP3
OP2
OP1
OP0
CDX-GT310MP
E model
Mexican model
0
0
4
B
0
0
CDX-GT31MP
CDX-GT313MP
Indian model
CDX-GT310MP
Saudi Arabia model
0
0
4
B
0
4
CDX-GT260MP
US model
Canadian model
0
0
4
3
0
2
CDX-GT260MP
Russian model
0
0
4
3
0
1
CDX-GT267ME
Russian model
0
0
6
3
0
7
CDX-GT310MP
Argentina model
0
0
4
B
0
3
Entering the Destination Code:
Select a number 0 - 9 or an alphanumeric character from A through F by rotating the rotary encoder.
Pressing of the ENTER or [SEEK+] button advances to the next digit.
Pressing of the [BACK] button or [SEEK–] button returns to the previous digit.
Once the six-digit value has been entered, press the ENTER.
4. Press the [SOURCE/OFF] button for 1 second to return to the normal mode.
Note:
After destination code setup is completed, con
fi
rm the destination code according to the following procedure.
Con
fi
rming the Destination Code:
1. With SOURCE OFF (clock display), press the button [4], button [5] and button [6] for 2 seconds to enter the Test mode.
2. With the version of the micropcessor displayed, press the [DISP] button to access the destination code display.
3. Con
fi
rm that the six-digit alphanumeric code of “F XXXXXX” appearing on the LCD display is the entered value.
4. Press the [SOURCE/OFF] button for 1 second to return to the normal mode.
