Sony CDX-GT06 - Fm/am Compact Disc Player, Service Manual

Page: 5 / 44

5
CDX-GT06/CXS-GT06HP
SECTION 1
GENERAL
• CONNECTIONS
This section is extracted
from instruction manual.
Location of controls and basic operations
Main unit
1 OFF button
To power off; stop the source.
2
Volume control dial/select button
To adjust volume (rotate); select setup items
(press and rotate).
3 EQ3 (equalizer) button
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE,
ROCK, CUSTOM or OFF).
4 Disc slot
To insert the disc (label side up), playback
starts.
5 Display window
6 Z (eject) button
To eject the disc.
7 DSPL (display)/DIM (dimmer) button
To change display items (press); change the
display brightness (press and hold).
8 (front panel release) button
9 SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press);
fi nd a station manually (press and hold).
0 SOURCE button
To power on; change the source (Radio/CD/
AUX).
qa BTM button
To start the BTM function (press and hold).
qs MODE button
To select the radio band (FM/AM).
qd RESET button (located behind the front
panel)
qf Number buttons
CD:
(3) : REP
To play the current track repeatedly.
(4) : SHUF
To play the tracks in random order.
Radio:
To receive stored stations (press); store
stations (press and hold).
qg SENS button
To improve weak reception: LOCAL/
MONO.
qh AUX input jack
To connect a portable audio device.
CDX-GT06
A
B
* AUDIO OUT SUB/REAR
Rear speaker
(not supplied)
Altavoz posterior
(no suministrado)
Active subwoofer
(not supplied)
Altavoz potenciador de
graves activo
(no suministrado)
Power amplifi er
(not supplied)
Amplifi cador de potencia
(no suministrado)
Conexion
Ejemplo de conexiones
Notas (
2
-B)
• Asegúrese de conectar primero el cable de conexión a masa
antes de realizar la conexión del amplifi cador.
• La alarma sonará únicamente si se utiliza el amplifi cador
incorporado.
Connection
Connection example
Notes (
2
-B)
•
Be sure to connect the ground lead before connecting the
amplifi er.
• The alarm will only sound if the built-in amplifi er is used.