29
Changing the sound and
display settings
The following items can be set:
SET
•Clock (page 10)
•Beep - to turn on or off the beeps.
•RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•Multi language (language selection) - to
change the display language to English,
French, or Spanish.
•D.Info (Dual Information) - to display the
clock and the play mode at the same time (on)
or to display the information alternately (off).
DIS
•SA (Spectrum Analyzer) - to change the
display pattern of the equalizer display.
•Dimmer - to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast - to adjust the contrast if the
indications in the display are not
recognisable because of the unit’s installed
position.
•M.Dspl (Motion display) - to turn the motion
display to 1, 2 , or off.
•A.Scrl (Auto Scroll) (page 13)
SND
•EQ Tune (Equalizer tuning) - to adjust the
frequency and volume level of the equalizer
curve.
•Front HPF (High pass filter for the front pre-
output) - to select the cut-off frequency of the
front pre-output.
•Rear HPF (High pass filter for the rear pre-
output) - to select the cut-off frequency of the
rear pre-output.
•SUB LPF (Low pass filter for the subwoofer
output) - to select the cut-off frequency of the
subwoofer output.
1
Press
(MENU)
.
2
Press either side of
(DISC/PRST)
repeatedly until the desired item
appears.
Each time you press (–) side of
(DISC/PRST)
, the item changes as follows:
Example:
Clock
t
Beep
t
RM
t
Multi language
t
D.Info
t
SA
t
Dimmer
t
Contrast
t
M.Dspl
t
A.Scrl
t
Local
t
Mono
t
IF
t
EQ Tune
t
Front HPF
t
Rear HPF
t
SUB LPF
t
Name edit
t
NameDel
t
BTM
Note
The displayed item will differ depending on
the source.
Tip
You can easily switch among categories (“SET”,
“DIS”, “P/M”, “SND” and “EDT”) by pressing
and holding either side of
(DISC/PRST)
for two
seconds.
3
Press either side of
(SEEK/AMS)
to select
the desired setting (Example: “on” or
“off”).
4
Press
(ENTER)
.
After the mode setting is complete, the
display returns to normal playback mode.
01US06OTH-U.p65
1/20/00, 10:14 PM
29
