12
Memorizing only the
desired stations
You can preset up to 30 stations (10 each for
FM1, FM2, and AM) in the order of your
choice.
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band.
3
Push the SEEK/AMS control up or down
to tune in the station that you want to
store on the number button.
4
Press and hold the desired number
button (
(1)
to
(10)
) until “MEM”
appears.
The number button indication appears in
the display.
Note
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by the
new one.
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, and AM).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press
(SOURCE)
repeatedly to select the
tuner.
Each time you press
(SOURCE)
, the source
changes as follows:
z
TUNER
z
CD
z
MD
*
*
If the corresponding optional equipment is
not connected, this item will not appears.
2
Press
(MODE)
repeatedly to select the
band.
Each time you press
(MODE)
, the band
changes as follows:
z
FM1
z
FM2
z
AM
3
Press
(SHIFT)
, then press
(4)
(PLAY
MODE) repeatedly until “B.T.M” appears.
4
Press
(5)
(
n
).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
5
Press
(SHIFT)
.
Notes
•
The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons will retain their former setting.
•
When a number is already indicated in the
display, the unit stores stations in order from the
one currently displayed.
