10
Storing the station names
—Station Memo
You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can assign a name of up to eight
characters per station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press
(LIST)
for two seconds.
3
Enter the characters.
1
Rotate the dial clockwise to select the
desired characters.
(A
n
B
n
C
n
··· Z
n
0
n
1
n
2
n
··· 9
n
+
n
–
n
*
n
/
n
\
n
>
n
<
n
.
n
_ )
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2
Press
(4)
(
n
) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press
(1)
(
N
), the flashing cursor
moves to the left.
3
Repeat steps
1
and
2
to enter the
entire name.
4
To return to normal radio reception,
press
(LIST)
for two seconds.
Tip
To erase or correct a name, enter “_” (under-bar)
for each character.
Displaying the station name
Press
(DSPL)
during radio reception.
Each time you press
(DSPL)
, the item
changes as follows:
z
Station name
*
z
Frequency
Clock
Z
*
If the station name of a station is not stored,
“NO NAME” appears in the display for one
second.
Erasing the station name
1
Tune in any station and press
(LIST)
for
two seconds.
2
Press
(DSPL)
for two seconds.
3
Rotate the dial to select the name that
you want to erase.
4
Press
(5)
(ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press
(LIST)
for two seconds.
The unit returns to the normal radio
reception mode.
