27
CDX-5V661/5V661A/5V661D/5V661S
4. Aging Mode
(See “Display List” on page 18 and 19) (Not used in this servicing)
This mode can execute and check various aging operations.
Push key (execution key) assignment
Key
Description
Function
1
DISP –
–
2
DISP +
–
3
–
–
4
–
–
5
DATA –
Change data at cursor position (active in AGING SETUP mode only)
6
DATA +
7
–
–
8
–
–
9
CURSOR –
Select the data position to be entered (active in AGING SETUP mode only)
0
qa
–
–
qs
–
–
qd
–
–
Activate the aging mode/count setup mode
Start the set aging operation (active in AGING SETUP mode only)
Stop the aging operation (active only during the aging operation)
Aging Start
• “PASS” will be displayed, if the aging operation is executed by the set count.
• Aging will continue infinitely, if “0” is set to the aging count.
• The operation will be stopped and “ERR” will be displayed, if an error occurred.
• The content of error is displayed in the DIAG mode.
• Aging mode
Location of respective motors
Elevator motor (M104)
(Located at lower position)
Divider motor (M105)
(Located at upper position)
Loading motor (M103)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
