Sony CDU701, User Manual

Page: 46 / 291

46
Installing the Drive Unit into the Computer
Reassembling the Computer
1
Reinstall the floppy disk drive in the top drive bay.
2
Reconnect the interface cables to the floppy disk drive.
3
Fasten the screws and front brackets as they were before.
4
Tuck the cables behind the drives so that they do not protrude
above the power supply module.
5
After checking the following points, slide the computer’s cover
on and fasten the cover mounting screws at the back of the
computer.
• Are the connections between the drive and computer correct?
• Are the jumpers set to the appropriate positions?
6
Remount the rear plastic panel and refer back to the proper
installation section if you answered “no” to either of the
questions above.
Reinstall the floppy disk drive.
Tuck the cables.
Power supply