Mounting the Host Adapter
Install the host adapter in one of the available system expansion slots of
your computer. Refer to the operating instructions included with the host
adapter for complete instructions on installation and settings.
18
Installing the Drive in Your Computer
Reassembling the Computer
1
Reinstall the floppy disk drive in the top drive bay.
2
Reconnect the cables to the floppy disk drive.
3
Fasten the screws and front brackets as they were before.
4
Tuck the cables behind the drives so that they do not protrude above the
power supply module.
5
After checking the following points, slide the computer’s cover on and
fasten the cover mounting screws at the back of the computer.
●
Are the connections between the drive and computer correct?
●
Are the jumpers set to the appropriate positions?
6
Remount the rear plastic panel and refer back to the proper installation
section if you answered “no” to either of the questions above.
Installing the Drive in Your Computer
19
Reinstall the floppy disk drive.
Tuck the cables.
Power supply
Install the host adapter in
one of the expansion slots.
