17
SECTION 6
MECHANICAL ADJUSTMENTS
Pop Up Mechanism Adjustment
1.
Turn on the power and set the dick to number 24.
2.
With the power ON, while pressing the GROUP FILE and
MEGA CTRL buttons, press the
I
/
1
button to enter the
Adjastment mode.
3.
Rotate the JOG dial and select the mechanism adjustment mode.
(“Mech Adjust” is displayed.)
Press the JOG dial.
4.
Keep pressing the GROUP 1 button to operate the loading
mechanism, and continue pressing until the disc table locks.
(Fig-1)
5.
Keep pressing the GROUP 2 button to raise the pop up part.
6.
Loosen the adjusting screw, move the screwdriver left and right
until the lever (POP UP) does not touch the slit wall, and secure
the screw. (Fig-2)
The following buttons have special functions in this mode.
GROUP 1 button: Loading mechanism IN operation
GROUP 5 button: Loading mechanism OUT operation
GROUP 2 button: Pop up part UP operation
GROUP 6 button: Pop up part DOWN operation
At this position,this
part will be locked.
lever (POP-UP 400)
Fix to the center so that the
lever (POP-UP 400) does
not touch the slit.
cover (chassis 400)
