17
SECTION 6
MECHANICAL ADJUSTMENTS
POP UP MECHANISM ADJUSTMENT
1. With the power ON, while pressing the
[GROUP 4]
and
[ ]
buttons, press the
[+100]
button to enter the mechanism ad-
justment mode.
2. Press the
[GROUP 1]
button to operate the loading mecha-
nism, and continue pressing until the disc table locks. (Fig-1)
3. Press the
[GROUP 2]
button to raise the pop up part.
4. Remove the cover (chassis), loosen the adjusting screw, move
the screwdriver left and right until the lever (POP UP) does
not touch the slit wall, and secure the screw. (Fig-2)
The following buttons have special functions in this mode.
[GROUP 1]
button: Loading mechanism IN operation
[GROUP 5]
button: Loading mechanism OUT operation
[GROUP 2]
button: Pop up part UP operation
[GROUP 6]
button: Pop up part DOWN operation
·
GROUP 1
GROUP 2
GROUP 4
Lever (pop up)
Fix to the center so that the
lever (POP UP) does not
touch the slit.
Cover (chassis)
At this position,this
part will be locked.
Fig-1
Fig-2