17
CDP-CE575
MECHANISM DECK CHECK MODE
For the mechanism desk check mode, two modes of the disc table mode and the loading mode are available.
In the mechanism deck check mode, the disc table rotating time and the loading time in each section are measured and displayed.
Disc Table Mode
Procedure:
1. Press the
[POWER]
button while pressing three buttons of
H
,
[ OPEN/CLOSE]
, and
[REPEAT]
simultaneously.
2. Start the table mode, and turn to right then turn to left, and display rotating time as follows.
3. To release from this mode, press the
[POWER]
button to turn OFF the power.
Loading Mode
Procedure:
1. Press the
[POWER]
button while pressing three buttons of
H
,
[ OPEN/CLOSE]
, and
[TIME/TEXT]
simultaneously.
2. Start the loading mode and display as follows.
Operation
Display
Start
START
– –. –
Open and close
CLOSE
1.9
BU up
BU UP
0.5
EX open
EX OPEN
1.9
EX close
EX CLOSE 2.2
BU down
BU DOWN 0.4
Open
OPEN
1.7
3. To change the display, turn the
[ AMS ]
knob.
4. To release from this mode, press the
[POWER]
button to turn OFF the power.
A
A
l
L
display
R 5 . 7 L 5 . 8
