Sony CD350 - CD Mavica 3.2MP Digital Camera Operating Instructions Manual Download Page 11

Page: 11 / 120

tti

ng st

Charging the battery pack

Open the battery cover.

Slide the cover in the direction of the arrow.

• Be sure to turn off your camera when

charging the battery pack (page 15).

•

Your camera operates only with the
“InfoLITHIUM” NP-FM50 battery pack (M
series) (supplied) (page 109).

Install the battery pack, then
close the battery cover.

Insert the battery pack with the

mark

facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.

•

The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment up.

Open the DC IN jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.

Connect the DC plug with the

mark

facing forward.

•

Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.

•

Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.

Battery eject lever

DC IN jack cover

AC Adaptor

DC plug

Getting started

Summary of Contents for CD350 - CD Mavica 3.2MP Digital Camera

























































































































Search results

Summary of Contents for CD350 - CD Mavica 3.2MP Digital Camera

Reviews:

Related manuals for CD350 - CD Mavica 3.2MP Digital Camera

Brands by name

Popular brands

Sony CD350 - CD Mavica 3.2MP Digital Camera, Operating Instructions Manual

Search results

Summary of Contents for CD350 - CD Mavica 3.2MP Digital Camera

Reviews:

Related manuals for CD350 - CD Mavica 3.2MP Digital Camera

Brands by name

Popular brands