Sony CD300 Operating Instructions Manual Download Page 31

Page: 31 / 108

masterpage:Right

filename[D:\WORKS\CD\3067951111\3067951111MVCCD200UC\02GB-

MVCCD200UC\04bas.fm]

BBBB

lay
b

model name1[MVC-CD200/CD300]

[3-067-951-11(1)]

Preparation for viewing images
using a computer

When your disc drive does not conform to 8 cm CD, use the supplied 8 cm CD
adaptor.

Using the supplied 8 cm CD adaptor

Slide the disc into the inner groove and under two of the tabs on
the inner circle of adaptor in the numbered order.

Pull the third tab out away from the disc and the disc will slip into
place. Release the third tab and the disc will be held firmly in place.

Printed side of the disc (The other side is
recordable side.)

Printed side of the adaptor (SONY is printed
on this side and the other side is the luster
side.)

01cov.book Page 31 Thursday, March 8, 2001 4:59 PM

Summary of Contents for CD300













































































































Search results

Summary of Contents for CD300

Reviews:

Related manuals for CD300

Brands by name

Popular brands

Sony CD300, Operating Instructions Manual

Search results

Summary of Contents for CD300

Reviews:

Related manuals for CD300

Brands by name

Popular brands