Sony CD300 Operating Instructions Manual Download Page 22

Page: 22 / 108

masterpage:Left

filename[D:\WORKS\CD\3067951111\3067951111MVCCD200UC\02GB-

MVCCD200UC\04bas.fm]

model name1[MVC-CD200/CD300]

[3-067-951-11(1)]

You can check the last recorded image by clearing the menu from the screen
(page 46) and pressing

(

) on the control button.

To return to the normal recording mode: press the shutter button lightly, or press

(

) again.

To delete the image: 1. Press MENU. 2. Select [DELETE] with

, then press the

center

. 3. Select [OK] with

, then press the center

Adjust the brightness with the [LCD BRIGHTNESS] item in the setup settings
(page 85). This adjustment does not affect the brightness of the images recorded on
the disc.

To turn off the LCD backlight

Press DISPLAY/LCD BACK LIGHT ON/OFF repeatedly to turn off the LCD
backlight (page 23). The battery life will be longer.

The lens part moves in/out while zooming. Be careful not to touch the lens.

If you cannot get a sharp focus on a close subject

Press the zoom W button repeatedly and move closer to the subject until the focus is
sharp (page 66).

Minimum focal distance to the subject

W side:

Approx. 50 cm (19 3/4 inches) (MVC-CD200)
Approx. 50 cm (19 3/4 inches) (MVC-CD300)

T side:

Approx. 60 cm (23 5/8 inches) (MVC-CD200)
Approx. 50 cm (19 3/4 inches) (MVC-CD300)

To record even closer subjects, see page 66.

Checking the last recorded image (

Quick Review

)

Adjusting the brightness of the LCD screen

Using the zoom feature

Zoom buttons

T: for telephoto
(subject appears
closer)

W: for wide-angle
(subject appears
farther away)

01cov.book Page 22 Thursday, March 8, 2001 4:59 PM

Summary of Contents for CD300













































































































Search results

Summary of Contents for CD300

Reviews:

Related manuals for CD300

Brands by name

Popular brands

Sony CD300, Operating Instructions Manual

Search results

Summary of Contents for CD300

Reviews:

Related manuals for CD300

Brands by name

Popular brands