28
B
Connecting to a power source
Using the dry battery
Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline battery
For the battery life, see “Specifications.”
Note
Be sure to remove the AC power adaptor when
using the dry battery.
1
Squeeze OPEN from both sides to
open the lid of your CD player,
then open the battery
compartment lid inside the player.
2
Insert the LR6 (size AA) alkaline
battery (not supplied) by matching
the
3
to the diagram in the battery
compartment and close the lid
until it clicks into place.
Insert the
#
end first.
When to replace the battery
You can check the remaining power of the
battery in the display.
t
t
t
t
t
Lobatt*
* Beep sounds.
When the battery is depleted, replace the dry
battery with new one.
Notes
• The indicator sections of
roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
To remove the battery
Remove the battery as illustrated below.
To attach the battery compartment lid
If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.
