Sony CCU-TX7, Operating Instructions Manual

Page: 10 / 24

10
Location and Function of Parts
Camera operation unit switches and knobs
SHUTTER
KNEE
IRIS
WHITE/BLACK BALANCE
OUTPUT
M.GAMMA
GAIN TLCS
DETAIL
OPERATE
SKIN
DETAIL
MASTER
BLACK
LOCK
PART
FULL
HIGH
MID
LOW
CAM
BARS
ON
Hz
OFF
ON
C.SCAN
AUTO
MANUAL
AUTO
PRESET
WHITE
BLACK
BLACK WHITE
AUTO
ATW
MANUAL
AUTO
MANUAL
OFF
PRE
ON
1 2 3 4
7
GAIN switch
8
TLCS switch
9
M. GAMMA knob
0
SKIN DETAIL switch
!¡
DETAIL knob
!£
DIP switch
!™
IRIS control section
1
OUTPUT switch
2
OPERATE switch
3
SHUTTER setting
section
4
WHITE/BLACK BALANCE
control section
5
KNEE switch
6
MASTER BLACK knob
The camera operation unit’s switches and knobs are
used to set and adjust video camera functions.
For details about the video camera functions and settings,
refer to operating instructions for your video camera.
1
OUTPUT switch
Use this switch to select the video to be output from
this unit.
CAM: Image being shot via video camera
BARS: Color bars generated by this unit
2
OPERATE (operation range setting) switch
Use this switch to set the operation range of the
camera operation unit.
LOCK: This setting disables all of the camera
operation unit’s functions.
PART: This setting enables only the IRIS control
section and MASTER BLACK knob to be
operated.
FULL: This setting enables all of the camera
operation unit’s functions to be used. Settings
changed while this switch was set to LOCK
become valid when this switch is set to FULL.