Sony CCD-TRV65E, CCD-TRV3E, CCD-TRV15E, CCD-TRV23E, CCD-TRV35E, Service Manual

Page: 112 / 188

5-26
1-5. LCD SYSTEM ADJUSTMENT
Note1: The back light (fluorescent tube) is driven by a high voltage
AC power supply. Therefore, do not touch the back light
holder to avoid electrical shock.
Note2: When replacing the LCD unit, be careful to prevent
damages caused by static electricity.
Note3: Set the brightness to the center using the LCD BRIGHT
button.
Note4:
2.5"LCD model:
PD-92board, Ref. No.5000 series
3"/3.5"LCD model:
PD-93board, Ref. No.4000 series
Note5: 2.5" LCD model :
CCD-TRV3E/TRV13E/TRV23E/TRV65E/TRV69E
3" LCD model : CCD-TRV75/TRV75PK/TRV715
3.5" LCD model : CCD-TRV45E/TRV55E
[Adjusting connector]
Most of the measuring points for adjusting the LCD display are
concentrated in the following connector.
CN5501 of the PD-92 board (2.5"LCD model)
CN4501 of the PD-93 board (3"/3.5"LCD model)
Connect the measuring instruments via the multi CPC jig (J-6082-
311-A).
The following table shows the Pin No. and signal name of the
connector.
Pin No. Signal name Pin No. Signal name
1 VB 2 VCO VOLTAGE.
3 VG 4 PANEL COM
5 VR 6 N.C.
7 SYNC / HD 8 H START
9 GND 10 GND
[LCD type check]
By measuring the resistor value between Pin
6
of CN5501/4501
and Pin
!º
of CN5501/4501, the type of LCD can be discriminated.
PD-92board CN5501
Resistor LCD type Model
value
8.2k
Ω
2.5" TYPE S (61k) CCD-TRV23E
6.8k
Ω
2.5" TYPE S (84k) CCD-TRV65E/TRV69E
3.9k
Ω
2.5" TYPE C PAL CCD-TRV3E/ TRV13E
PD-93board CN4501
Resistor LCD type Model
value
4.7k
Ω
3" TYPE S NTSC CCD-TRV75/TRV75PK/
TRV715
6.8k
Ω
3.5" TYPE S PAL CCD-TRV45E/TRV55E
1. LCD Initial Data Input
Mode VTR stop
Signal Arbitrary
Adjustment Page E
Adjustment Address A5 to A7, B0 to B9, BF, C0, C1, CF,
D0 to DD
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, and input the data in the following table.
Note:
To write in the non-volatile memory (EEPROM), press
the PAUSE button of the adjusting remote commander each
time to set the data.
3) Select page: 0, address: 01, and set data: 00.
< > : NTSC model only
[ ] : PAL model only
Note1:
B0: NTSC model
F0: PAL model
Note2:
A4: 2.5" LCD model
8B: 3" LCD model
91: 3.5" LCD model
Note3:
D8: 2.5" LCD TYPE S model
CF: 2.5" LCD TYPE C model
B8: 3" LCD model
B7: 3.5" LCD model
Note4: 00: NTSC model
7A: LCD TYPE S PAL model
77: LCD TYPE C PAL model
Note5: LCD TYPE S/LCD TYPE C
A5 53 Fixed value
A6 96 Fixed value
A7 68 Fixed value
B0 3F Fixed value
B1 C8 Fixed value
B2 1F Fixed value
B3 1F Fixed value
B4 00 Fixed value
B5 00 Fixed value
B6 Note1 Fixed value
B7 4E Fixed value
B8 08 Fixed value
B9 00 Fixed value
BF 80 [VCO adjustment] <Fixed value>
C0 Note2 Fixed value
C1 Note3 Fixed value
CF 69/84 Bright adjustment (Note 5)
D0 7A/77 Color adjustment (Note 5)
D1 AA/98 White balance adjustment (Note 5)
D2 9C/7B White balance adjustment (Note 5)
D3 B1/DC Contrast adjustment (Note 5)
D4 B1/80 D range adjustment (Note 5)
D5 94/89 V-COM level adjustment (Note 5)
D6 80 VCO adjustment
D7 80 V-COM level adjustment
D8 80 Fixed value
D9 Note4 [Color adjustment] <Fixed value>
DA 80 Fixed value
DB 52 Fixed value
DC 99 Fixed value
DD 99 Fixed value
Address Data Remark