Sony CCD-TRV15, Service Manual

Page: 88 / 253

5-1
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6082-311-A
J-6082-382-A
J-6082-223-A
J-6082-312-A
J-6080-621-A
J-6082-357-A
J-6082-383-A
J-6082-188-A
Name
Filter for color temperature correction
(C14)
ND filter 1.0
ND filter 0.3
Pattern box PTB-450
Color chart for pattern box
Adjusting remote commander
(RM-95-remodeled partly) Note 1
Siemens star
Multi CPC jig
CPC-7 jig
Power code Note 2
AFM DEV jig
Clear chart
Extension cable (16P, 0.5 mm)
IR receiver jig
Extension cable (48P, 0.8 mm)
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
Note 1:
If the micro processor IC in the adjusting remote
commander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).
SECTION 5
ADJUSTMENTS
Refer to page 3 as Table for distinction
functions of models and classification
5-1. CAMERA SECTION ADJUSTMENTS
1-1. PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope
• Adjusting driver
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For adjusting LCD block
For the color viewfinder adjustment
For adjusting the video section
For connecting the battery terminal and DC power supply
For adjusting the deviation
For extension between the CD-197/198 board (CN401) and
VC-195 board (CN501)
For adjusting the IR transmitter
For extension between the DD-105 board (CN401) and
VC-195 board (CN914)
CCD-TRV15/TRV15E/TRV15EP/TRV15PK/TRV25/TRV25PK/TRV35/TRV35E/
TRV65/TRV65PK/TRV85/TRV93/TRV215/TRV615/TRV815
• Color monitor
• Regulated power supply • Vectorscope
• Digital voltmeter
Note 2:
Connect the adjusting remote commander to the LANC
jack, and set the HOLD switch to the “ADJ” side.
Fig. 5-1-1.
J-1 J-2
J-3
J-4 J-5
J-7 J-6 J-8 J-9 J-10
J-11 J-12 J-13 J-14