AAAAyA<H.L0.idx>
7
Switches and Knobs on the Rear and Right Side
4
CALL button
Press this button to call the operator of the camera
control unit or remote control panel. Pressing this
button lights the tally indicator (red) on the camera
control unit, on the remote control panel, and in the
camera’s viewfinder. This unit’s back tally indicator
3
also lights if the TALLY switch
2
is in the ON
position.
5
AUDIO SELECT (CH1/CH2) switches
Select the source for signals to be transferred via the
camera control unit’s channel 1 and channel 2.
CAMERA: Transfers audio from a microphone on
the camera to the camera control unit.
CA-MIC: Transfers audio from a microphone
connected to this unit’s MIC IN (CH1/CH2)
connector to the camera control unit.
CA-LINE: Transfers audio from a line output
connected to this unit’s MIC IN (CH1/CH2)
connector to the camera control unit.
1
Cursor knobs (for DXC-D30/D30P)
When the CURSOR switch
8
is set to A or B, this
adjusts the position and size of the box cursor that is
displayed in the viewfinder of the DXC-D30/D30P.
H-POSITION: Adjusts the horizontal position of the
box cursor.
V-POSITION: Adjusts the vertical position of the
box cursor.
WIDTH: Adjusts the width of the box cursor.
HEIGHT: Adjusts the height of the box cursor.
2
TALLY switch
Set this switch to the ON position to activate the back
tally indicator
3
.
3
Back tally indicator (red)
When the TALLY switch
2
is in the ON position, this
indicator lights (in red) in response to this unit’s
operating status. It also lights when the CALL button
on the camera control unit or remote control panel has
been pressed.
4
CALL button
7
UHF portable tuner
taps
1
Cursor knobs
2
TALLY switch
5
AUDIO SELECT (CH1/CH2) switches
6
MIC IN +48V (CH1/CH2) switch
3
Back tally indicator
8
CURSOR switch
Illustration: CA-TX7
