45
Preparation and Setting
Outputting Trunk Signal
When connected to the HXC-D70 HD Color Camera
You can communicate with an external device that is connected to the TRUNK
connector (RS-232C) or REMOTE connector of the HXC-D70, and an external
device that is connected to the TRUNK connector of the CCU.
To output trunk signal from the HXC-D70
Configure the following menu (MAINTENANCE menu M13: <TRUNK>) of the HXC-
D70.
Configure the setting according to the interface of the connected device.
* default setting.
Using an Intercom
You can talk to the CCU operator by attaching an intercom headset to the
INTERCOM connector of the adaptor.
When connected to the HXC-D70 HD Color Camera
The INTERCOM connector of the HXC-D70 is also available for communication with
the CCU operator. The talk line of the HXC-D70 can be controlled by the INTERCOM
line switch of the adaptor.
• Configure the settings of the connected intercom headset in the OPERATION
menu of the HXC-D70.
13 <HEAD SET>: Settings for input of the headset’s microphone
14 <INTERCOM LEVEL>: Settings for the SIDE TONE level of the headset
The displayed items in the above menu are as follows:
Intercom1 (CAM): Intercom settings of the HXC-D70
Intercom2 (CA): Intercom settings of the adaptor
When you do not use the INTERCOM connector of the HXC-D70, set the
INTERCOM ON/OFF switch of the HXC-D70 to OFF.
For details, refer to the operating instructions of the HXC-D70.
Menu page
Item
Setting
Description
<TRUNK>
TRUNK
OFF
Disable the trunk signal output
ON*
Enable the trunk signal output
Interface
232c*
Outputs from the TRUNK connector
via RS-232C I/F
422a
Outputs from the REMOTE connector
via RS-422A I/F
Summary of Contents for CA-FB70
Page 28: ...仕様 28 CCU 端子 ピン番号 信号 A Optical INPUT B Optical OUTPUT 1 DC IN GND 2 NC 3 NC 4 DC IN 48V ...
Page 54: ......
Page 55: ......
Page 56: ...Printed in Belgium ...
