Sony BVP-E30 series, Brochure & Specs, Page: 13 / 14

CA-590P
General
Power consumption 8 W
Operating temperature -20 to +45 ˚C (-4 to +113 ˚F)
Storage temperature -20 to +50 ˚C (-4 to +122 ˚F)
Dimensions (W x H x D) 120 x 211 x 202 mm (4
3
/
4
x 8
3
/
8
x 8 inches)
Mass 2.8 kg (6 lb 3 oz)
Input/output connectors
Audio input (CH-1/CH-2) XLR-3-pin, female, 600
Ω
, balanced
DC input XLR-4-pin, DC 10.5 to 17 V
DC output 4-pin, DC 10.5 to 17 V, max. 1.5 A
Return BNC, 1.0 Vp-p, 75
Ω
Prompter BNC, 1.0 Vp-p, 75
Ω
Return control 6-pin
Earphone Mini-jack, 8
Ω
Camera interface 68-pin
CCU Triax
Intercom (1, 2) XLR-5-pin, female
Remote 8-pin
Tracker 10-pin
Supplied Accessories
Carrying belt (1), cable holder (2), M3 x 6 screws (4), operation manual (1)
CCU-590P CCU-790P
General
Power requirements AC 100 to 240 V, 50/60 Hz, maximum 1.8 A AC 110 to 120 V/220 to 240 V, 50/60 Hz
Operating temperature -10 to +40 ˚C (+14 to +104 ˚F) 0 to +45 ˚C (+32 to +113 ˚F)
Dimensions (W x H x D) 200 x 124 x 365 mm (7
7
/
8
x 5 x 14
3
/
8
inches) 424 x 133 x 394 mm (16
3
/
4
x 5
1
/
4
x 15
5
/
8
inches)
Mass Approx. 5.5 kg (12 lb 2 oz) Approx. 12 kg (26 lb 7 oz)
Signal inputs
Reference BNC (loop-through), VBS/BS, 1.0 Vp-p, 75
Ω
Return (1, 2)* 1 BNC (loop-through), VBS, 1.0 Vp-p, 75
Ω
SDI return (3, 4) BNC, SDI/VBS selectable
VBS: 1.0 Vp-p, 75
Ω
SDI: SMPTE 259M
Prompter* 1 BNC (loop-through), VBS, 1.0 Vp-p, 75
Ω
Signal outputs
VBS/SDI BNC (x3), VBS/SDI selectable
VBS: 1.0 Vp-p, 75
Ω
SDI: SMPTE 259M
SDI — BNC (x3)* 2
Analogue component BNC (x3 for 1 set), Y/R-Y/B-Y or G/R/B switchable
Y: 1.0 Vp-p, 75
Ω
, R-Y/B-Y: 525 mVp-p, 75
Ω
R/G/B: 700 mVp-p, 75
Ω
PIX BNC, 1.0 Vp-p, 75
Ω
WF BNC, 1.0 Vp-p, 75
Ω
700 mVp-p, 75
Ω
WF mode 4-pin
Audio XLR-3-pin (x2), 0 dBu/-20 dBu, balanced
Sync BNC, 0.3 Vp-p, 75
Ω
Camera input/output signals
Camera Triax
Coax BNC, 75
Ω
Remote 8-pin
Ethernet IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
Intercom/tally/programme D-sub 25-pin
4W/RTS
Tally: DC 24 V, TTL level or contact selectable
Microphone remote D-sub 15-pin
Intercom (front) XLR-5-pin
Supplied Accessories
AC power cord (1), AC power plug holder (1), 4-pin connector (1), number plate (1), operation
manual (1)
*1: The same signal is input to the RET-2 and the PROMPTER connectors.
*2: Available only when SDI out is selected for VBS/SDI output 1.
13