background image

5-

GB

Table of contents

Introduction

•The unit is designed to communicate with a Bluetooth device, and allow that device to

access the Internet to send/receive data via the modem.

•The unit complies to the protocols of a dial-up network.
•Use of size AA alkaline dry batteries allows the unit to be used as a mobile device.

An overview of the Bluetooth wireless technology

The Bluetooth wireless technology allows communication between various Bluetooth
devices without using cables. Devices which can use this technology include PCs,
computer peripheral devices, PDAs, and mobile phones. This omnidirectional
communication system enables communication even if the Bluetooth device is in a bag
or there are obstacles between the devices.

On trademarks

•The BLUETOOTH trademarks are owned by their proprietor and used by Sony

Corporation under license.

•All other product names mentioned herein may be the trademarks or registered

trademarks of their respective companies. Furthermore, “™” and “®” are not
mentioned in each case in this manual.

Precautions .................................................................................................................................. 6
Identifying the parts .................................................................................................................. 7
Preparing the unit ...................................................................................................................... 8

Installing the exclusive modem card and exclusive modem cable to the Modem

Adaptor with Bluetooth Function ............................................................................. 8

Preparing the power supply .............................................................................................. 8

Setting up the unit .................................................................................................................... 10
Registering Bluetooth devices ................................................................................................ 12
Communicating with the Bluetooth device ......................................................................... 14
Troubleshooting ........................................................................................................................ 15
Specifications ............................................................................................................................ 17

Summary of Contents for BTA-NW1





































Reviews: