GB
10
Selecting the Menu Language
Selecting the Menu Language
The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug the AC power cord into a wall
outlet.
2
Turn on the projector.
Press the
?
/
1
key on the main unit or the
?
key on the Remote Commander.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image (page 12).
4
Select the menu language.
1
Press the
V
or
v
key to select the
Operation (
) menu then press
the ENTER key.
2
Press the
V
or
v
key to select
“Language (
)” then press the
ENTER key.
3
Press the
V
/
v
/
B
/
b
key to select a
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
1
2
3
MENU
Language
English
Reset
Menu Position
Bottom Left
Status On
IR Receiver
Front & Rear
ID Mode
All
Security Lock
Off
Panel Key Lock
Off
Sel
Set
Back
Operation