manualshive.com logo in svg

Sony BRC-X400, Operating Instructions Manual, Page: 33 / 104

Share
Download
Sony BRC-X400 Operating Instructions Manual Download Page 33

33

Setting menu

The setting menu selected on the main menu is 
displayed.

Setting menu

The name of the setting menu currently 
selected is displayed.

Cursor

The cursor selects a setting item.
Press the 

 or 

 button of the remote 

commander to move the cursor up or down.

Setting items

The setting items for this setting menu are 
displayed.
Press the 

 or 

 button of the remote 

commander to select a setting item. Press 
the 

 or 

 button to change the set value.

Set value

The current set values are displayed.
Press the 

 or 

 button of the remote 

commander to change the set value.

Control button display section

For the default value of each setting item, see 
“Menu Configuration” (page 51).

Status

Display the items selected in the menu and 
device information.

EXPOSURE Menu

The EXPOSURE menu is used to set the items 
regarding the exposure.
You can set the menu from the Administrator 
menu on a web browser.
For details, see “Picture tab” (page 69).

Note

When the high-sensitivity mode is set to ON, the 
available setting range differs. High-sensitivity 
mode is set to OFF at the factory settings. To turn 
it ON, use the VISCA command.

MODE (Exposure - Mode)

[FULL AUTO]:

 The exposure is adjusted 

automatically using the gain, electronic 
shutter speed, and iris setting.

[MANUAL]:

 You can manually adjust the gain, 

electronic shutter speed, and iris setting 
individually.

[SHUTTER Pri]:

 You can adjust the electronic 

shutter speed manually. Automatically 
adjusts the exposure using the gain and 
iris.

[IRIS Pri]:

 You can adjust the iris setting 

manually. Automatically adjusts the 
exposure using the gain and electronic 
shutter speed.

When you select any of the above modes, you 
will see available options for the selected mode 
among the following setting items.

GAIN (Exposure - Gain)

Select the gain.
When [MODE] is [MANUAL], you can choose a 
value from 0 to 36 dB (in 3 dB increments). When 
high-sensitivity mode is set to ON, the available 
range is expanded from 0 to 48 dB (in 3 dB 
increments). 

Summary of Contents for BRC-X400









































































































Reviews:

No comments