49
Storing Camera Pan/Tilt
and Zoom Operations
– PTZ TRACE function
Up to 16 pan/tilt/zoom operation patterns can be stored
for up to 180 seconds.
This allows you to perform quick operations using the
remote commander, without displaying the menu.
To perform an operation without displaying the menu,
set PRESET MODE in the SYSTEM menu (page 40) to
TRACE.
To display the menu and perform an operation, see “PTZ
TRACE Menu” (page 43).
• If using the remote commander, pan/tilt and zoom
operations cannot be performed simultaneously.
• The menu and camera status are not displayed on the
screen.
• Recorded operations will be erased if the IMG FLIP
setting or camera operating frequency setting is
changed.
• When P/T SPEED TYPE is set to Extd. STEP, the
recorded trace may not be reproducible upon
playback.
• Playback operations will restore CLEAR IMAGE
ZOOM, RAMP CURVE, P/T SPEED TYPE, P/T
SLOW MODE, and ZOOM SPEED TYPE to their
states held during recording.
• The camera supports up to 16 patterns of recorded
operations. The number of patterns that are supported
will vary depending on the device used.
- RM-IP500 (sold separately): Up to 16
- RM-IP10 (sold separately): Up to 16
- Remote commander (supplied): Up to 6
Recording pan/tilt and zoom
operations
1
Adjust the operation start position of the
camera.
2
Hold down the PRESET button and press
any of the POSITION1 to 6 buttons in which
you want to store the settings.
Recording starts.
3
Perform the pan/tilt and zoom operations
you want to record.
4
To stop recording, hold down the PRESET
button, and press the POSITION button
selected in step 2.
Playing pan/tilt and zoom
operations
1
Press one of the POSITION1 to 6 buttons.
The camera moves position to the playback start
position.
2
Press the same POSITION button again.
Playback starts.
Playback stops if a pan, tilt, or zoom operation is
performed during playback.
Deleting recorded pan/tilt and
zoom operations
Hold down the RESET button and press the desired
POSITION1 to 6 button for which you want to clear the
registered recording.
Notes
PO
WER
CAMERA SELECT
1
2
3
AU
TO
POSITION
HOME
STD
REV
BA
CK LIGHT
MANU
AL
FA
R
NEAR
W
T
W
T
1
2
3
4
5
6
PA
N-TI
LT
L/R
DIRECTION SET
PA
N-
TI
LT
RESET
DA
TA
SCREEN
RESET
RESET
PRESET
SLO
W
FAST
ZOOM
FOCUS
1, 3
2, 4
POSITION 1
~
6
2, 4
PRESET
Note
Summary of Contents for BRC-H800
Page 65: ...Sony Corporation ...
