Font Size
>
> Checking server connection
Checking server connection
Overview
The TV checks if the server is being correctly recognized when you cannot connect it to your
home network. If the diagnostic results indicate a failure, check possible causes, network
connections and settings.
Steps
1.
Press the HOME button, then select [Settings] at the bottom of the screen using the /
buttons.
2.
Select [Network] using the / buttons, then press the button.
3.
Select [Home Network Setup] using the / buttons, then press the button.
4.
Select [Media Server Troubleshooting] using the / buttons, then press the button.
5.
Follow the on-screen instructions to perform the diagnostics.
To return to the last viewed source, press the HOME button twice.
© 2012 Sony Corporation
123