XBR-40LX900/46LX900/52LX900/60LX900
26
SERVICE ADJUSTMENTS
2-2-3. SETTING THE DESTINATION
After replacing the BUHS Board or the LCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
BUHS Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
01: 1a
7. Press
1
to move to “
001 DEST
” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
UC
3
US/CND
LTN-D
16
MX/
LATIN AMERICA
UC grp
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BUHS Board replacement.
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display
the
DIGITAL Service Menu
.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP
or
OPTIONS
on the Remote
Commander.
