Sony BRAVIA VPL-VW90ES, Service Manual

Page: 42 / 168

2-12 (E)
VPL-VW90ES
2-6-5. Obtaining of LookUpTable/3DGamma/ABGamma/LCK/OGMTable/CSMa-
trixTable from the Board
1. Connect the AC plug and set this unit to standby state.
2. Com
fi rm the Standby Mode is set to “Standard”. (Refer to Section 2-6-1.)
3. When obtaining LookUpTable, 3DGamma, ABGamma, or LCK, press the
[ON/STANDBY]
button
to light the lamp.
4. Double-click QuickAccess.exe to start the application.
Application name: 3DGamma QuickAccess
Execution fi le name: QuickAccess.exe
Version: 8.42 or later
5. Select “VPL-VW90ES” on the Model pull-down menu.
6. Select Save on the Load/Save pull-down menu.
7. Select the data type (3DGamma/ABGamma/LookUpTable/LCK/OGMTable/CSMatrixTable) on the
3dgm/Lut pull-down menu.
8. Click the
[Next]
button.
9. Select an arbitrary fi le name.
10. Click the
[Next]
button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper box: Serial port number used for connecting PC
Lower box: 38400
12. Click the
[Next]
button.
13. Click the
[OK]
button to decide input content.
The saving is executed.
When completed, the massage “Completed.” appears.
14. Turn off the power of this unit.
15. Click the
[Complete]
button.