Sony BRAVIA VPL-VW70, Operating Instructions Manual

Page: 55 / 172

55
GB
Usi
ng th
e Menus
Device List:
Lists all the Control for HDMI compatible equipment
connected to the projector.
All equipment listed (except AV amplifier) can be selected with
SYNC MENU of the remote control of the projector. When
“Enable” is selected, the Control for HDMI setting of Sony
equipment (AV amplifier, video, etc.), which is compatible with
“Control for HDMI - Easy Setting”, will also be effective.
• When “Standby Mode” is set to “Low”, this item will not operate
(This will not be displayed on the menu screen).
• To use the “Control for HDMI - Easy Setting” function, the
connected equipment must be compatible with “Control for HDMI
- Easy Setting” and the power has to be “On”. For details, see
“About the Control for HDMI” (
1
page 60).
* “Control for HDMI - Easy Setting” is a function that makes the
Control for HDMI setting of equipment connected to HDMI input
of the projector effective as well when the Control for HDMI
setting of the projector is effective. This function is only available
between compatible Sony equipment, and some equipment may
not be compatible.
Auto Input Search
Detects the input signal and displays the detected input signal
automatically when the INPUT button is pressed.
When set to “On”, the input terminal with effective signal is
automatically detected and pictures are displayed by pressing
INPUT. Input signals are detected in the sequence of HDMI 1,
HDMI 2, Video, S-video, Input-A and Component, and the input
terminal that follows the currently selected input terminal will be
detected. Set this to “Off” when you want to select an input selector
with no input signal, or you want to switch the setting manually.
Test Pattern
Displays the test pattern.
When set to “On,” a test pattern appears on the screen to be used
when adjusting the lens with “Lens Focus,” “Lens Zoom,” and “Lens
Shift,” or correcting the screen proportions with “V Keystone.” A
test pattern does not appear when this item is set to “Off.”
Tip
While the test pattern is displayed, it is only displayed in green to
allow you to adjust the focus easily.
Background
Selects the background color of the screen when no signal is input.
You can select “Black” or “Blue”.
Notes