
SONY KLV-40U100M
18
3. Input /Output Specification
3.1 PC Input Signal Connector
Lay the display on the desired operation and plug the power cord into a convenient AC outlet. Three-wire power cord
must be shielded and is provided as a safety precaution as it connects the chassis and cabinet to the electrical
conduct ground. If the AC outlet in your location does not have provisions for the grounded type plug, the installer
should attach the proper adapter to ensure a safe ground potential.
Connect the 15-pin D-SUB color display shielded signal cable to your signal system device and lock both screws on
the connector to ensure firm grounding. The connector information is as follow:
1
6
11
15
5
10
15 - Pin Color Display Signal Cable
Pin
No. Descriptions Pin
No. Descriptions
1 Red
Video 9
+5V
2 Green
Video 10 VGA-CAB
3 Blue
Video 11 GROUND
4 TXD 12
SGA-SDA
5 GROUND 13
Horizontal
Sync.
6
Red Video Ground
14
Vertical Sync.
7 Green
Video
Ground 15
VGA-SCL
8
Blue Video Ground
Apply power to the display by turning the power switch to the "ON" position and allow about ten seconds for Panel
warm-up. The Power-On indicator lights "GREEN" when the display is on.
With proper signals feed to the display, a pattern or data should appear on the screen, adjust the brightness and
contrast to the most pleasing display, or press auto-adjust to get the best picture-quality.
This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the signal
cable to the PC.
If your TV requires service, it must be returned with the power cord.
Summary of Contents for BRAVIA KLV-40U100M
