23
GB
D:\SONY TV\SY160189_KMW KMLW3240 PAA\4691192111_GB\060NHM.fm
masterpage: Right
KLV-49W772E / 49W672E / 43W772E / 40W672E / 40R472E / 32W672E / 32W622E / 32R422E
4-691-192-
11
(1)
Naviga
ting thr
o
ugh Home Me
nu
GB
Subwoofer:
To enable, set
[Headphone/Audio Out] to
[Subwoofer].
Subwoofer Level
Adjust subwoofer volume level.
Phase
Select the phase polarity.
Subwoofer Sync
Adjusts the time lag of Subwoofer
sound.
Digital Audio Out:
Sets the audio signal
that is output by connecting using
digital audio output (optical)* cable
or HDMI cable.
* Only on limited region/country/TV model
Auto 1
Output compressed audio without
change.
Auto 2
Output only compressed audio for
multichannel content without
change.
PCM
Always output in PCM.
TV Position:
Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
HDMI signal format (Only on limited
region/country/TV model):
Standard format
Standard HDMI format for normal
use.
Enhanced format
Set only when using devices
supporting HDMI 2K HDR (High
Dynamic Range) format.
Note
• HDMI IN 1 and HDMI IN 2 signal format
changes at the same time.
• Change to [Standard format] if the picture
and sound do not output correctly in
[Enhanced format].
• Some contents may not be displayed as 2K
HDR when 4K HDR contents playback from a
source device.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI port of the TV.
Note that communication settings must
also be made on the connected
equipment.
BRAVIA Sync Control:
Sets whether or
not to link the operations of the TV
and the connected equipment that is
compatible with BRAVIA Sync
Control. When set to [On], the
following functions are available. If
the specific Sony equipment that is
compatible with BRAVIA Sync Control
is connected, this setting is applied
to the connected equipment
automatically.
Auto Devices Off:
When set to [On], the
connected equipment that is
compatible with BRAVIA Sync Control
turns off when your TV goes to
standby mode.
Auto TV On:
When set to [On], the TV
turns on when you turn on the
connected equipment that is
compatible with BRAVIA Sync
Control.
BRAVIA Sync Device List:
Displays a list
of connected equipment that is
compatible with BRAVIA Sync
Control. Select [Enable] to update the
[BRAVIA Sync Device List].
Device Control Keys:
Select button
functions of the TV’s remote control
to operate the connected
equipment.
None
Deactivates the control by the TV’s
remote control.
Normal
For basic operations, such as navigation
buttons (up, down, left or right, etc).
Tuning Keys
For basic operations and operation of
channel-related buttons, such as
PROG +/–
or
(0-9)
, etc.
Useful when
you control a tuner or set-top box,
etc; via the remote control.
