19
GB
D:\SONY TV\SY140238_SE2_SE2N_PAA_IM\4562312111\060NHM.fm
masterpage: Right
KLV-48R562C / 48R552C / 40R562C / 40R552C / 32R562C / 32R512C / 32R502C / 32R412C
4-562-312-
11
(1)
Naviga
ting thr
o
ugh Home Me
nu
GB
Advanced Settings
Dynamic Range:
Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the programme regardless of
the [Dynamic Range] setting.
HE-AAC Audio Level:
Adjust the HE-
AAC audio sound level.
MPEG Audio Level:
Adjusts the MPEG
audio sound level.
Screen
Wide Mode
For details about wide mode, see page 12.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment. To keep your setting,
select [Off].
Hint
• Even if [Auto Wide] is set to [On] or [Off], you
can always modify the format of the screen by
pressing
repeatedly.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjusts the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
PC Settings
Adjusts the picture size, see page 12.
Channel Set-up
1 Digit Direct
When [1 Digit Direct] is set to [On], you can
select a channel using one preset number
button (0 - 9) on the remote control.
Auto Tuning
Tunes in all the available channels
Programme Sorting
Changes the order in which the channels
are stored on the TV.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/–
to select the programme
number with the channel. You cannot
select a programme number that is set to
[Skip:] (page 19).
Programme/TV System:
Presets
programme channels manually.
Channel:
Selects a channel number.
AFT:
Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Audio Filter:
Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I] and [D/K].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip:
Skips unused channels.
Colour System:
Select the colour
system ([Auto], [PAL], [SECAM],
[NTSC3.58], [NTSC4.43] or [PAL60])
according to the channel.
Signal Level:
Displays the signal level
for programme currently being
watched.
