masterpage:3 columns Right
71
O
th
e
r Info
rm
atio
n
F:\Worker\SONY TROY2 ANA EN 12(1)\2694282121\01US08OTH.fm
KF-42/50E200A
2-694-282-
12
(1)
Channels
General
Cannot raise the volume on
external speakers
❏
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 53). Or, to use the TV remote control, set the
Audio Out
option to
Variable
.
❏
To turn on the TV speakers, set the
Speaker
option to
On
No audio for HDMI
❏
Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.
Problem
Possible Remedies
Problem
Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press
ANT
to select the VHF/UHF/CABLE input (see page 33).
❏
Use
Auto Program
in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
Cannot receive any channels
when using cable TV
❏
Use
Auto Program
in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
❏
Press
ANT
to select the CABLE input (see page 33).
Cannot receive or select
channels
❏
Use
Auto Program
in the Channel setting to add receivable channels that are not
presently in TV memory (see page 56).
Problem
Possible Remedies
How to reset TV to factory
settings
❏
Turn on the TV. While holding down the
M
button on the remote control, press the
POWER
button on the TV. Release the
POWER
button then release the
M
button.
The TV will turn itself off, then back on again with Initial Setup.
WARNING: This operation will clear all of your customized settings including
Parental Lock
setting.
How to restore Picture settings
to factory settings
❏
Select
Reset
setting option while in the Picture setting (see page 49).
How to restore Sound settings
to factory settings
❏
Select
Reset
setting option while in the Sound setting (see page 52).
Cannot cycle through the other
video equipment connected to
the TV
❏
Be sure that the
Label Video Inputs
option is not set to
Skip
Cannot operate the setting
❏
If a setting option appears in gray, this indicates that the setting option is not available.
Lost password
❏
On the password screen (see page 57), enter the following master password:
4357
.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER LED on front panel is
lit
❏
When lit, indicates that the timer is set (see page 62). When the timer is set, this
LED will remain lit even when the TV is turned off.
LAMP LED blinks in red
❏
Replace the lamp (see page 66).
Digital cable box does not work
❏
If you are connecting a VCR and digital cable box using a splitter, as described on
page 26, you must use a special bi-directional splitter that is designed to work with
your digital cable box. Contact your cable provider for details.
(Continued)
